Cosmetics Pure Water System
Raw water → quartz sand filter → activated carbon filter → softened water device → intermediate water tank → low pressure pump → precision filter → first stage reverse osmosis → second stage reverse osmosis → Aseptic purification tank → purified water booster pump → Microporous filter → purified water point
Raw water → quartz sand filter → activated carbon filter → softened water filter → precision filter → First stage reverse osmosis → pure water tank → pure water booster pump → Second stage reverse osmosis → sterile purification tank → Ozone sterilizer → purified water booster pump → Ozone sterilizer → ultraviolet sterilizer → Microporous filter → purified water water point
At present, these two kinds of water-making techniques are more suitable for the special requirements of cosmetics production water, and the cost of investment is low and the effect is good, and it is the first choice for the production and use of many cosmetics industries.
Purified water is an indispensable and important raw material in the production process of cosmetics, because the daily drinking water contains a large number of inorganic ions, such as magnesium, zinc, the existence of interference with the static charge balance of some surfactant systems, causing the separation of previously stable products. Therefore, cosmetic water needs to remove inorganic ions from the water, and the other requirement is to contain no or as few microorganisms as possible. Microorganisms will make cosmetics accelerate corruption and even make products produce strange odor, causing harm to consumers, which is what all cosmetic manufacturers do not want to see.
According to the technical requirements of the Cosmetic Production Enterprises, the water quality of cosmetic production water should at least meet the sanitary standard for drinking water. However, purified water is usually purified by drinking water as the source of water, which is better than drinking water in chemical indicators such as ions, and is more suitable for the production process of cosmetics, so many companies now design process water systems based on purified water as the standard.
Equipment performance:
1. The equipment adopts integrated casting, stable operation and exquisite appearance, effectively reducing space.
2. Equipped with original water tank, intermediate water tank, purified water tank to ensure the final water quality is stable.
3. Imported Dow membrane, high desalting rate, can make the equipment long-term stable operation, energy consumption reduced by 20%.
4. Optional ozone sterilizer and ultraviolet sterilizer and terminal microfiltration device.
5. The control system adopts automatic mode, and the main components are imported products, which increases the service life of the equipment and also ensures the water quality of the water outlet.
6. Equipped with an alarm control system for water quality exceeding the standard, to prevent water quality exceeding the standard caused by shutdown and starting from entering the water tank and affecting the subsequent water quality.
7. LCD touch color screen display running status, the operation panel is simple, and can display multiple groups of system parameters, including conductivity, resistivity, temperature, working status and other parameters.
Equipment parameters:
Operating pressure: less than 1.6 (Mpa)
Water resistivity: 5-18.2M
Water yield: 0.25-100 tons/hour
Water quality: 15-18MΩ·CM
Voltage: 380 (V)
Power: 2.2K (w)
Conductivity: less than 10US
Desalting rate: 99.88 (%)
Single output: 0.25-1000T (/h)